Advanced Industries provides resources to keep customers informed about industrial product details. Read further for more information on specific products’ ratings, classifications and sizes. With knowledge comes advancement – Advanced Industries.
Click On a Chart’s Link to View It
| NEMA Rating Chart (Enclosures) | Common | IEC Equal |
| NEMA 1 | Indoor use, limited amounts of falling dirt. No gasket | IP10 |
| NEMA 3R | Outdoor use, rain sleet, external formation of ice. No gasket | IP54 |
| NEMA 4/4X | Indoor/Outdoor, wind blow dust & rain, splashing water, direct spray down. Corrosion(4X only) Fully Gasketed | IP56 |
| NEMA 12 | Indoor use/limited outdoor use, Circulating dust, falling Dirt, Splashing/Dripping water. Fully Gasketed | IP52 |
| Hazardous Location Classification | |
| Class 1 | Gases; Areas where inflammable gases or vapors may be present in sufficient quantities to produce explosive or flammable mixture |
| Class 2 | Dust; Areas where combustible dust is present. |
| Class 3 | Fibers; areas where ignitable fibers or flyings are present in sufficient quantities to produce ignitable mixtures. |
| Division 1 | Always Present; Areas where the hazardous condition normally present either continuously or periodically |
| Division 2 | Not Normally Present; Areas where the hazardous condition is present due to accidental rupture, breakage or unusual faulty operation of a closed container or system. |
| Nema Rating Chart (Motors) | Rating at 460 Volts |
| Size 00 | 1/3HP – 2HP |
| Size 0 | 2HP – 5HP |
| Size 1 | 5HP – 10 HP |
| Size 2 | 10HP – 25HP |
| Size 3 | 25HP – 50HP |
| Size 4 | 50HP – 100HP |
| Size 5 | 100HP – 200HP |
| Ampacity Chart: Raceway, Cable, Or Earth. No more than 3 current-carrying conductors. UGLY’S PG 73 | |||
| Size | 60°C | 75°C | 90°C |
| CU ONLY | Types: TW, UF | Types: RHW, THHW, THW, | Types: TBS, SA, SIS, FEP, FEPB, MI, |
| THWN, XHHW, USE, ZW | RGG, RHW-2, THHN, THHW, THW-2, | ||
| THWN-2, USE-2, XHH, XHHW, XHHW-2, ZW-2 | |||
| 14 | 15 | 20 | 25 |
| 12 | 20 | 25 | 30 |
| 10 | 30 | 35 | 40 |
| 8 | 40 | 50 | 55 |
| 6 | 55 | 65 | 75 |
| 4 | 70 | 85 | 95 |
| 3 | 85 | 100 | 115 |
| 2 | 95 | 115 | 130 |
| 1 | 110 | 130 | 145 |
| 1/0 | 125 | 150 | 170 |
| 2/0 | 145 | 175 | 195 |
| 3/0 | 165 | 200 | 225 |
| 4/0 | 195 | 230 | 260 |
| 250 | 215 | 255 | 290 |
| 300 | 240 | 285 | 320 |
| 350 | 260 | 310 | 350 |
| 500 | 320 | 380 | 430 |
| 750 | 400 | 475 | 535 |
| 1000 | 455 | 545 | 615 |
| Conduit Fill Chart: Rigid Metal Conduit. UGLY’S PG 92-93 | ||||||
| THHN,THWN,THWN-2 | 1/2 | 3/4 | 1 | 1-1/4 | 1-1/2 | 2 |
| 14 | 13 | 22 | 36 | 63 | 85 | 140 |
| 12 | 9 | 16 | 26 | 46 | 62 | 102 |
| 10 | 6 | 10 | 17 | 29 | 39 | 64 |
| 8 | 3 | 6 | 9 | 16 | 22 | 37 |
| 6 | 2 | 4 | 7 | 12 | 16 | 27 |
| 4 | 1 | 2 | 4 | 7 | 10 | 16 |
| 3 | 1 | 1 | 3 | 6 | 8 | 14 |
| 2 | 1 | 1 | 3 | 5 | 7 | 11 |
| 1 | 1 | 1 | 1 | 4 | 5 | 8 |
| 1/0 | 1 | 1 | 1 | 3 | 4 | 7 |
| 2/0 | 0 | 1 | 1 | 2 | 3 | 6 |
| 3/0 | 0 | 1 | 1 | 1 | 3 | 5 |
| 4/0 | 0 | 1 | 1 | 1 | 2 | 4 |
| 250 | 0 | 0 | 1 | 1 | 1 | 3 |
| XHH,XHHW,XHHW-2 | 1-1/2 | 2 | 2-1/2 | 3 | 4 | 6 |
| 1/0 | 4 | 7 | 10 | 16 | 28 | 64 |
| 2/0 | 3 | 6 | 9 | 13 | 23 | 53 |
| 3/0 | 3 | 5 | 7 | 11 | 19 | 44 |
| 4/0 | 2 | 4 | 6 | 9 | 16 | 36 |
| 250 | 1 | 3 | 5 | 7 | 13 | 30 |
| 500 | 1 | 1 | 2 | 4 | 7 | 16 |
| FLA Chart 3-Phase Uglys PG 39 | ||
| HP | 230 V | 460 V |
| 1/2 | 2.2 | 1.1 |
| 3/4 | 3.2 | 1.6 |
| 1 | 4.2 | 2.1 |
| 1-1/2 | 6 | 3 |
| 2 | 6.8 | 3.4 |
| 3 | 9.6 | 4.8 |
| 5 | 15.2 | 7.6 |
| 7-1/2 | 22 | 11 |
| 10 | 28 | 14 |
| 15 | 42 | 21 |
| 20 | 54 | 27 |
| 25 | 68 | 34 |
| 30 | 80 | 40 |
| 40 | 104 | 52 |
| 50 | 130 | 65 |
| 60 | 154 | 77 |
| 75 | 192 | 96 |
| 100 | 248 | 124 |
| Pipe O.D. / weight per foot Chart | |||||||
| Pipe Size | O.D. in inches | S10 | S40S/STD | S80S/XH | S160 | XXH | |
| 1/2 | 0.84 | .083 .67 |
.109 .85 |
.147 1.09 |
.188 1.31 |
.294 1.72 |
WALL THCK LB’S / FT |
| 3/4 | 1.05 | .083 .86 |
.113 1.13 |
.154 1.48 |
.219 1.95 |
.308 2.44 |
|
| 1 | 1.315 | .109 1.41 |
.133 1.68 |
.179 2.17 |
.250 2.85 |
.358 3.66 |
|
| 1-1/4 | 1.66 | .109 1.81 |
.140 2.27 |
.191 3.00 |
.250 3.77 |
.382 5.22 |
|
| 1-1/2 | 1.9 | .109 2.09 |
.145 2.72 |
.200 3.63 |
.281 4.86 |
.400 6.41 |
|
| 2 | 2.375 | .120 2.64 |
.154 3.66 |
.218 5.03 |
.344 7.47 |
.436 9.04 |
|
| 2-1/2 | 2.875 | .120 3.53 |
.203 5.80 |
.276 7.67 |
.375 10.02 |
.552 13.71 |
|
| 3 | 3.5 | .120 4.34 |
.216 7.58 |
.300 10.26 |
.438 14.34 |
.600 18.60 |
|
| 4 | 4.5 | .120 5.62 |
.237 10.80 |
.337 15.00 |
.531 22.53 |
.674 27.57 |
|
| 5 | 5.563 | .134 7.78 |
.258 14.63 |
.375 20.80 |
.625 32.99 |
.750 38.59 |
|
| 6 | 6.625 | .134 9.30 |
.280 18.99 |
.432 28.60 |
.719 45.39 |
.864 53.21 |
|
| 8 | 8.625 | .148 13.41 |
.322 28.58 |
.500 43.43 |
.906 74.76 |
.875 72.49 |
|
| 10 | 10.75 | .135 18.67 |
.365 40.52 |
.500 54.79 |
1.125 115.75 |
1.00 104.23 |
|
| 12 | 12.75 | .180 24.19 |
.375 49.61 |
.500 65.48 |
1.312 160.42 |
1.00 125.61 |
|
| Flange Bolting Information 150# | ||||
| Size | Number of Bolts | Diameter | Bolt Length | Stud Length |
| 1/2 | 4 | 1/2 | 2.00 | 2.50 |
| 3/4 | 4 | 1/2 | 2.25 | 2.50 |
| 1 | 4 | 1/2 | 2.25 | 2.75 |
| 1-1/2 | 4 | 1/2 | 2.50 | 2.75 |
| 1-1/2 | 4 | 1/2 | 2.50 | 3.00 |
| 2 | 4 | 5/8 | 2.75 | 3.25 |
| 2-1/2 | 4 | 5/8 | 3.00 | 3.50 |
| 3 | 4 | 5/8 | 3.25 | 3.75 |
| 3-1/2 | 8 | 5/8 | 3.25 | 3.75 |
| 4 | 8 | 5/8 | 3.25 | 3.75 |
| 5 | 8 | 3/4 | 3.25 | 4.00 |
| 6 | 8 | 3/4 | 3.50 | 4.00 |
| 8 | 8 | 3/4 | 3.75 | 4.25 |
| 10 | 12 | 7/8 | 4.00 | 4.75 |
| 12 | 12 | 7/8 | 4.25 | 4.75 |
| 14 | 12 | 1 | 4.50 | 5.25 |
| 16 | 16 | 1 | 4.75 | 5.50 |
| 18 | 16 | 1-1/8 | 5.00 | 6.00 |
| 20 | 20 | 1-1/8 | 5.50 | 6.25 |
| 24 | 20 | 1-1/4 | 6.00 | 7.00 |
| Flange Bolting Information 300# | ||||
| Size | Number of Bolts | Diameter | Bolt Length | Stud Length |
| 1/2 | 4 | 1/2 | 2.25 | 2.75 |
| 3/4 | 4 | 5/8 | 2.50 | 3.00 |
| 1 | 4 | 5/8 | 2.75 | 3.25 |
| 1-1/2 | 4 | 5/8 | 2.75 | 3.25 |
| 1-1/2 | 4 | 3/4 | 3.00 | 3.75 |
| 2 | 8 | 5/8 | 3.00 | 3.50 |
| 2-1/2 | 8 | 3/4 | 3.50 | 4.00 |
| 3 | 8 | 3/4 | 3.75 | 4.25 |
| 3-1/2 | 8 | 3/4 | 3.75 | 4.50 |
| 4 | 8 | 3/4 | 4.00 | 4.50 |
| 5 | 8 | 3/4 | 4.25 | 4.75 |
| 6 | 12 | 3/4 | 4.25 | 5.00 |
| 8 | 12 | 7/8 | 4.75 | 5.50 |
| 10 | 16 | 1 | 5.50 | 6.25 |
| 12 | 16 | 1-1/8 | 6.00 | 6.75 |
| 14 | 20 | 1-1/8 | 6.25 | 7.00 |
| 16 | 20 | 1-1/4 | 6.50 | 7.50 |
| 18 | 24 | 1-1/4 | 6.75 | 7.75 |
| 20 | 24 | 1-1/4 | 7.25 | 8.25 |
| 24 | 24 | 1-1/2 | 8.00 | 9.25 |
| Flange Bolting Information 600# | |||
| Size | Number of Bolts | Diameter | Stud Length |
| 1/2 | 4 | 1/2 | 3.25 |
| 3/4 | 4 | 5/8 | 3.50 |
| 1 | 4 | 5/8 | 3.75 |
| 1-1/2 | 4 | 5/8 | 4.00 |
| 1-1/2 | 4 | 3/4 | 4.25 |
| 2 | 8 | 5/8 | 4.25 |
| 2-1/2 | 8 | 3/4 | 4.75 |
| 3 | 8 | 3/4 | 5.00 |
| 3-1/2 | 8 | 7/8 | 5.50 |
| 4 | 8 | 7/8 | 5.75 |
| 5 | 8 | 1 | 6.50 |
| 6 | 12 | 1 | 6.75 |
| 8 | 12 | 1-1/8 | 7.75 |
| 10 | 16 | 1-1/4 | 8.50 |
| 12 | 20 | 1-1/4 | 8.75 |
| 14 | 20 | 1-3/8 | 9.25 |
| 16 | 20 | 1-1/2 | 10.00 |
| 18 | 20 | 1-5/8 | 10.75 |
| 20 | 24 | 1-5/8 | 11.50 |
| 24 | 24 | 1-7/8 | 13.00 |